View TM070DDH01-00_7790344.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 1 of 21 model no. : TM070DDH01-00 issued date: 2010-11-8 version : ver. 1.0 preliminary specification final product specification customer : approved by notes shanghai avic confirmed : prepared by checked by approved by olive yue 2010.11.8 hyman chen 2010.11.8 anfernee du 2010.11.8 this technical specification is subjected to change without notice
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 2 of 21 table of contents table of contents .............................................................................................................. ................ 2 record of revision............................................................................................................. ............... 3 1 general specifications ......................................................................................................... ...... 4 2 input/output terminals ......................................................................................................... ...... 5 3 absolute maximum ratings ....................................................................................................... 7 4 electrical characteristics..................................................................................................... ....... 8 5 timing chart................................................................................................................... ...........11 6 optical characteristics ........................................................................................................ ..... 15 7 environmental / reliability test ............................................................................................... .18 8 mechanical drawing............................................................................................................. .... 19 9 packing drawing................................................................................................................ ....... 20 10 precautions for use of lcd modules....................................................................................... 21
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 3 of 21 record of revision rev issued date description editor 1.0 2010-11-8 preliminary specification release olive yue
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 4 of 21 1 general specifications feature spec size 7.0 inch resolution 1024 rbg(h)600(v) interface lvds 40 pin color depth 16.7 m technology type a-si tft pixel pitch (mm) 0.1500.150 pixel configuration rgb stripe display mode normally white surface treatment(up polarizer) anti-glare viewing direction 12 o?clock display spec. gray scale inversion direction 6 o?clock lcm (w x h x d) (mm) 165.75 w 105.39(h)3.40(d) active area(mm) 153.6(h)90.0(v) with /without tsp without tsp weight (g) tbd mechanical characteristics led numbers 18 leds note 1: viewing direction for best image quality is different from tft definition. there is a 180 degree shift. note 2: requirements on environmental protection: rohs note 3: lcm weight tolerance: +/- 5%
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 5 of 21 2 input/output terminals 2.1 cn1 of fpc pin no. symbol i/o function remarks 1 vcom p common voltage 2 vdd p power voltage for digital circuit 3 vdd p power voltage for digital circuit 4 nc --- no connection 5 reset i global reset pin 6 stbyb i standby mode, normally pulled high stbyb=?1?,normally operation stbyb=?0?,timing controller, source driver will turn off, all output are high-z 7 gnd p ground 8 rxin0- i - lvds differential data input 9 rxin0+ i +lvds differential data input 10 gnd p ground 11 rxin1- i -lvds differential data input 12 rxin1+ i +lvds differential data input 13 gnd p ground 14 rxin2- i -lvds differential data input 15 rxin2+ i +lvds differential data input 16 gnd p ground 17 rxclkin- i -lvds differential clock input 18 rxclkin+ i +lvds differential clock input 19 gnd p ground 20 rxin3- i -lvds differential data input 21 rxin3+ i +lvds differential data input 22 gnd p ground 23 nc --- no connection 24 nc --- no connection 25 gnd p ground 26 nc --- no connection 27 nc --- no connection 28 vdd i vdd 29 avdd p power for analog circuit 30 gnd p ground 31 led- p led cathode 32 led- p led cathode 33 led- p led cathode 34 vgl p gate off voltage 35 nc --- no connection 36 nc --- no connection 37 vgh p gate on voltage
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 6 of 21 note: i/o definition. i---input pin, o---output pin, p--- power/ground, n--- no connection 2.2 u/d r/l function description scan control input updn shlr scanning direction gnd vdd up to down, left to right vdd gnd down to up, right to left gnd gnd up to down, right to left vdd vdd down to up, left to right 38 led+ p led anode 39 led+ p led anode 40 led+ p led anode
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 7 of 21 3 absolute maximum ratings agnd= gnd=0v, ta = 25 item symbol min max unit remark vdd -0.3 5.0 v avdd 6.5 13.5 v vgh -0.3 20.0 v power voltage vgl -20.0 0.3 v backlight forward current i led C 20 ma for each led operating temperature t opr -20 60 storage temperature t stg -30 70
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 8 of 21 4 electrical characteristics 4.1 recommended operating condition agnd=gnd=0v, ta = 25 item symbol min typ max unit remark digital supply voltage vdd 3.0 3.3 3.6 v analog supply voltage avdd 10.8 11 11.2 v gate on voltage vgh 19.7 20 20.3 v gate off voltage vgl -6.5 -6.8 -7.1 v common electrode driving signal vcom (3.6) (3.8) (4.0) v note: the value is for design stage only.
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 9 of 21 4.2 recommended driving condition for backlight ta=25 item symbol min typ max unit remark forward current i f - 20 - ma forward voltage v f - 9.9 - v operating life time - 20,000 - - hrs 18 leds (3 led serial, 6 led parallel) note1: the led driving condition is defined for each led module (3 led serial, 6 led parallel).for each led: i f (1/6) =20ma, v f (1/3) =3.3v. note2: under lcm operating, the stable forward current should be inputted. and forward voltage is for reference only. note3: i f is defined for one channel led.optical performance should be evaluated at ta=25 only if led is driven by high current, high ambient tem perature & humidity condition. the life time of led will be reduced.operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. note4: the led driving condition is defined for each led module. 5 6
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 10 of 21 4.3 power consumption agnd=gnd=0v, ta = 25 item symbol condition min typ max unit remark digital supply current i vdd vcc=3.3 v - - 60 ma analog supply current i avdd avdd=11 v - -- 30 ma gate on current i vgh vgh=20 v - -- 1.0 ma gate off current i vgl vgl=-6.8 v - -- 1.0 ma panel&gamma - tbd tbd mw backlight - 1.2 - w power consumption to ta l - tbd tbd w 4.4 block diagram
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 11 of 21 5 timing chart 5.1 ac electrical characteristics parameter symbol min typ max unit conditions clock frequency r xfclk 40.8 51.2 71 mhz input data skew margin t rskm 500 C C ps clock high time t lvch C 4/(7* r xfclk ) C ns clock low time t lvcl C 3/(7* r xfclk ) C ns pll wake-up time t enpll C C 150 us 5.2 input clock and data timing diagram:
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 12 of 21 5.3 dc electrical characteristics vdd=3.3v, avdd=11v, agnd=gnd=0v, ta=25 parameter symbol min typ max unit remark differential input high threshold voltage r xvth ? ? +0.1 v differential input low threshold voltage r xvtl -0.1 ? ? v input voltage range r xvin 0 ? vdd-1.2+ |v id |/2 v differential input common mode voltage r xvcm |v id |/2 ? vdd-1.2 v differential input voltage |v id | 0.2 v 0.6 v differential input leakage current rv xliz -10 v +10 ua lvds digital operating current iddlvds ? 15(tbd) 30(tbd) ma fclk=65mhz,vdd=3.3v lvds digital stand-by current istlvds ? 10(tbd) 50(tbd) ua clock & all functions are stopped
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 13 of 21 5.4 timing parameter symbol min typ max unit remark clock frequency fclk 40.8 51.2 67.2 mhz frame rate=60hz horizontal display area thd 1024 dclk hs period time th 1114 1344 1400 dclk hs blanking thbp+thfp 90 320 376 dclk vertical display area tvd 600 h vs period time tv 610 635 800 h vs blanking tvbp+tvfp 10 35 200 h 5.5 data input format
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 14 of 21 5.4 power on/off sequence
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 15 of 21 6 optical characteristics ta=25 item symbol condition min typ max unit remark t - 70 - b - 75 - l - 75 - view angles r cr R 10 - 75 - degree note 2 contrast ratio cr = 0 tbd 500 - note1 note3 t on response time t off 25 - 20 tbd ms note1 note4 x - 0.31 white y - 0.33 x - tbd red y - tbd x - tbd green y - tbd x - tbd chromaticity blue y backlight is on - tbd note1 note5 uniformity u - 75 - % note1 note6 ntsc - 50 - % note 5 luminance l tbd 250 - cd/m 2 note1 note7 test conditions: 1. i f = 20 ma, v f =9.9 v and the ambient temperature is 25 . 2. the test systems refer to note 1 and note 2.
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 16 of 21 note 1: definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. note 2: definition of viewing angle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) note 3: definition of contrast ratio ?white state ?: the state is that the lcd should drive by vwhite. ?black state?: the state is that the lcd should drive by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and item photo detector field contrast ratio luminance lum uniformity bm-5a chromaticity sr-3a 1 response time trd100 - 500mm photo detector field lcd panel tft-lcd module the center of the screen
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 17 of 21 ?black? state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity (u) = lmin/ lmax l-------active area length w----- active area width lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance: measure the luminance of white state at center point.
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 18 of 21 7 environmental / reliability test no test item condition remarks 1 high temperature operation ts = +70 , 240 hours iec60068-2-1:2007 gb2423.2-2008 2 low temperature operation ta = -20 , 240 hours iec60068-2-1:2007 gb2423.1-2008 3 high temperature storage ta = +80 , 240 hours iec60068-2-1:2007 gb2423.2-2008 4 low temperature storage ta = - 3 0 , 240 hours iec60068-2-1:2007 gb2423.1-2008 5 storage at high temperature and humidity ta = +60 , 90% rh max,240hours iec60068-2-78 :2001 gb/t2423.3?2006 6 thermal shock (non-operation) -30 30 min~+80 30 min, change time:5min, 20 cycle start with cold temperature, end with high temperature, iec60068-2-14:1984,g b2423.22-2002 7 esd c=150pf,r=330 ? ,5point/panel air:8kv,5times; contact:4kv,5times (environment:15 ~35 , 30%~60%.86kpa~106kpa) iec61000-4-2:2001 gb/t17626.2-2006 8 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z. (6 hours for total) iec60068-2-6:1982 gb/t2423.10?1995 9 mechanical shock (non op) half sine wave 60g 6ms, x,y,z 3times for each direction iec60068-2-27:1987 gb/t2423.5?1995 10 package drop test height:80cm, 1corner,3edges,6surfaces iec60068-2-32:1990 gb/t2423.8?1995 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of samples.
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 19 of 21 8 mechanical drawing
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 20 of 21 9 packing drawing no item model (material) dimensions(mm) unit weight(kg) quantit y remark 1 lcm module TM070DDH01-00 165.75x 105.39 x 3.4 tbd 50 2 partition_1 corrugated paper 513x333x215 1.571 1 3 anti-static bag pe 180x160x0.05 0.001 50 anti-static 4 dust-proof bag pe 700x530 0.06 1 5 partition_2 corrugated p aper 505x332x4.0 0.098 2 6 corrugated bar corrugated paper 513x146 19.5 0.057 4 7 carton corrugated paper 530x350x250 1.12 1 8 model label 35 x 15 0.001 1 9 total weight tbd 5 lcm module ? ? ? 8 8 9 ? ? ? 8 8 9
shanghai avic optoelectronics the information contained herein is the exclusiv e property of shanghai avic optoelectronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai avic op toelectronics corporation. page 21 of 21 10 precautions for use of lcd modules 10.4 handling precautions 10.1.1 the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol solvents other than those mentioned above may damage the polarizer. especially, do not use the following: water ketone aromatic solvents 10.1.6 do not attempt to disassemble the lcd module. 10.1.7 if the logic circuit power is off, do not apply the input signals. 10.1.8 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1 be sure to ground the body when handling the lcd modules. 10.1.8.2 tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.5 storage precautions 10.2.1 when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humidity: 80% 10.2.3 the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.6 transportation precautions 10.3.1 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive pr ess, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM070DDH01-00

	To Download TM070DDH01-00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .